Running line tensionmeters – Research vessel Dana
The ultimate test
Overloading equipment and experiencing malfunctions hundreds of kilometers from land is both expensive and time-consuming. When working in uncontrolled environments like the North Sea, dangerous situations can arise when you least expect them – especially if you cannot measure the forces at play.
To obtain a reliable load indicator for trawling fishing, ship inspector Jens Krogh contacted Vetec and asked if our Running Line Tensionmeters could provide the necessary security. Three voltage meters were installed, and they have each served for two years as load monitoring systems. Since then, there have been no incidents and therefore no interference with Danas important work.
The research vessel Dana
Dana is the largest research vessel in Denmark, providing the empirical basis for scientific research and recommendations at DTU Aqua.
One of the major tasks for Dana is collecting data to monitor the condition of the Danish and European gardens. Most samples are collected using a 2.5-kilometer trawl, and the samples are processed immediately in the laboratories on board.
Dana is an interesting case, as maritime conditions are the ultimate test for electronic equipment. Vetec’s Running Line Tensionmeters were mounted on the existing wire ropes on deck, which means extreme temperatures, sea water contact and constant shocks – without breaking down. A Running Line Tensionmeter reduces the risk of unwanted incidents and equipment failure – and in this case, we have been down for two years without any problems.
Reliable technology
A Running Line Tensionmeter is a construction of three load pins that provide three separate load indications. The three data streams are designed for a single indication, providing a continuous data stream for easy load monitoring. The design allows the wires to move freely through the tension meter, making it very easy to add to existing setups.
The tried and tested design is all about functionality, and therefore unnecessary elements have been eliminated. The Running Line Tensionmeters from Dana have been in operation for two years under extremely demanding conditions. Maintenance of Dana’s Running Line Tensionmeters has shown no technical problems after two years of operation and has only required a replacement of wear parts and a standard calibration. the stem cells.
If you are further interested in the research vessel Dana, you can visit Dana’s official website.